Styrax

The Air Shower system controls the sequential locking and release of the doors, and controls the Blower. The two doors are interlocked such that two doors cannot be open at the same time, to prevent pressure losses and cross contamination.

Our Air Shower interlocking system achieve this by preventing simultaneous access of door by ensuring that when one door for a Air Shower interlocking system is open then other door is closed, before opening of door.

1. When any one of the Door is opened the display on the other doors will indicate “WAIT” & person access the door by pressing push butt

Features:
Advanced Micro controller based
ON/OFF Message Display
Relay O/P for Blower (up to 1 HP), UV Lamp & CF Lamp
ON/OFF Massage status indication with high intensity Bar LEDs
Status indication: ON, OFF-Blower, ON, OFF- UV Lamp & ON, OFF – CF Lamp
Blower Failure Status Indications
Soft touch Membrane / Capacitive Touch keypad
Easy for Installation
Specifications:
DPM
Keypad : 3 - Soft Touch Membrane Keypad or Capacitive Touch Keypad
Display : 6 – 14 x7 Bar LED's Indicated ON/OFF status of Blower, UV & CF
LED Indications : 5 3mm Red LED Indications for Blower failure Status
A

These Electronics Status Boards should display following parameters.
Previous Product
Batch No.
Product Name
Batch No.
Batch Size
Manufacturing Date
Expiry Date
Status
Specifications:
18.5” LCD display with Broadcom BCM2837B0, Cortex-A53(ARMv8) 64-bit SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN,Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
Extended 40-pin GPIO header
Full-size HDMI
4 USB 2.0 ports
4-pole stereo output and composite video port
Micro SD port for loading your operating system and storing data

In order to increase operational and energy efficiency, you are looking for new ways to make managing your facility easier. Sanrock Automation can successfully integrate, install and maintain building management systems and provide life cycle support for facilities like yours, making it easier to increase comfort, safety and security for your occupants.

We offer a scalable range of building management and intelligent building solutions and services from individual subsystems to fully integrated intelligent buildings that reduce risk while delivering world class operating and energy efficie

Utility Management System
SANSOFT
Runtime System - SANSOFT 21 CFR Part 11 Compliance web based SCADA software.
Administration Module :
User Management
Device Management
Dashboard Module
Reports and Audit Trail Logs
Dashboard Module :
Login / logout
Tabular data presentation of configured devices
Pictorial presentation of data of devices
Alerts on key parameter changes
Scope In detail
User Management :
Login / Logout
Add/Edit/Del/View of users
Password complexity
Password Expiry
Locking of user after 3 wrong attempts
Unlocking by administrator
Device Management :
Add/Edit

Features :
Advanced Microcontroller based DP measurement.
Software programmable channel ranges, units & resolution.
4 Digit, 0.56” bright LED display for displaying differential pressure.
Process parameter status indication with LEDs.
Process value violations display indication.
User selectable set limits for process value violation.
Inbuilt buzzer to audible process value violation.
Password protection for programming mode.
Software Calibration.
Proximity keypad to program DPI105DI and DPI105DE.
Specifications :
Input Type :
Inbuilt Integral Sensors
4 - 20mA
0 - 10VDC.
0 - 20

Features:
Door interlocking systems supports maximum of 16doors
Microcontroller based Door Interlocking System
User can configure Normally Closed mode or Normally Open mode
Configurable door closure time interval for 4 to 16 door interlocking systems
Pre-defined door closure time interval for 2 and 3 door interlocking systems
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
Configurable door delay timer from Door Interlocking BMS System
Relay status Indications
“GO”,“WAIT” Door Status Indications along with Timer
It supports Emergency Stations with buzzer
It s

Styrax Instruments India Pvt. Ltd., has been one of the prominent manufacturers and suppliers of Process Measure and Control Systems, Clean room Interlocking Systems, Automation Solutions and hi-tech security and access control systems.

Our systems and products are engineered with excellent application options and implementations. Having established our credentials in the domestic and international market. We possess the capability of catering to the diverse requirements across multifarious industries.

In order to increase operational and energy efficiency, you are looking for new ways to make managing your facility easier. Sanrock Automation can successfully integrate, install and maintain building management systems and provide life cycle support for facilities like yours, making it easier to increase comfort, safety and security for your occupants.

We offer a scalable range of building management and intelligent building solutions and services from individual subsystems to fully integrated intelligent buildings that reduce risk while delivering world class operating and energy efficie

The STYRAX “Temperature and RH Transmitter” has been specially developed keeping process measurement requirements of CLEAN ROOMS in Pharmaceutical industries. RHT105 is a high-performance 4/3-wired Relative Humidity and Temperature Transmitter. Its relative humidity and temperature transmitter is available in surface mount, duct mount and remote sensor versions. This transmitter is accurate to 1.5% for relative humidity and within 0.3 °C for temperature.
Features :
Advanced Microcontroller based process measurement.
Software programmable measurement range settings.
5-point calibration for

GPS/Server based Wired Clocks
Master Clock
6 digit 7 segment LED display.
0.8” seven segment LED to display Hours and Minutes.
0.5” seven segment LED to display Seconds.
LED Color : Red or Green.
Accuracy : ±2minutes per year at 25°C.
Battery backup for RTC : 3.6VDC Lithium-Ion.
Communication : RS-485.
Time format : 24Hrs.
No. of Slave : 32 without repeater.
Operating Voltage : 230VAC 25Watt.
Dimensions : 90mm L x250mm W x 45mm D.
Slave Clock
4 digit 7 segment 1”/2”/4” LED display to display Hours and Minutes.
6 digit 7 segment 1” LED display.LED Color: Red or Green.
Accuracy

Features :
Advanced Microcontroller based process measurement.
Programmable channel ranges and unit selections.
Programmable resolution.
4 Digit, 0.39”/0.56”/0.8”/1.0”/1.2”/1.5”/1.8”/2.0” bright 7- Segment LED display for displaying Temperature, RH and DP.
User selectable set limits for process value violation.
Process parameter status indication with 3 Bi-Color 3mm LEDs.
Inbuilt buzzer to audible process value violation.
Password protection for calibration and programming mode.
Software Calibration for 3 channels.
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, et

Styrax Instruments India Pvt Ltd is the pioneer in the sector of Manufacturing and Supply of
“Process Measure & Control Systems, Door Interlocking Systems, Digital Clocks and Automation Solutions”. The company is tracking the path of progress with its innovative measures in gifting the
“best in sector” to its esteemed clients. The company’s excellent expertise and hardwork are the pillars of Styrax towards its success
Styrax Instruments India Pvt. Ltd., has been one of the prominent manufacturers and suppliers of Process Measure and Control Systems.

Clean room Interlocking Systems, Auto